or sale,

Louie Baur 

Honda 2005 crf250 f

Whipple twin screw supercharger for sale, it's for a '99-03' chevy/gmc 4.-6.0 v-8 he bought it used, had it gone through at the factory, never put it on his truck because it got stolen and totaled. As far as I know it 100% complete with all plumbing and wiring for street use. if someone wanted it for a rail as long as they are using the factory gm pcm for engine management it should work fine. these units come factory with a 5psi pulley and an over boost bypass valve. but, since I have this same compressor on my truck, I know how to defeat the bypass valve and also have a smaller pulley that should put the boost in the 9-10 psi range. if you use anything other than the 5lb pulley the pcm has to be tuned for it and the injs [if stock] need to be upgraded. if it's being used on the smaller v-8 I have a set of stock 6.0 injectors for sale also which should be adequate for fuel delivery. if used on a 6.0 at higher boost, you need what I have which are 8,1 marine inj's. Anyway, let me know if anyone is interested. these go for about 5k new he wants $2500 for it. etchayes@adelphia.net

2007 Race Rhino with less than 100 miles.

. Built in early 07 and raced three times (WON TWICE)
. Never been driven since.
. Cannot drive due to Health Issues!
. 1st Class Built - $50,000.00 to duplicate today!

This is the top of the line Full Chromolly Tube Chassis Short Course Race
Rhino!!!  Or Serious Recreation Toy! Built by SoCal Fab this 07' Yamaha 660
race rhino started with only 1 mile on it! This Race Rhino has a complete
chromolly cage (built to spec) that is 100% TIG welded. All control arm
mounts are gusseted and boxed for added strength. It sports SCF's long
travel suspension with modified mounts for sway-bars. The arms, along with
the nerf bars, have been sand blasted and nickel plated. Axles are 6" over
Gorilla's and Bilstein shock with External Reservoirs. Wheels are Douglas
Rockstars (powder coated black) with black Beadlock Specialties mounted on
newly released Pirelli tires (those comparable to 589's). As we go inside,
seats are PRP Competition race seats, with CROW 5-point harnesses. Peddles
have been modified and brakes have proportioning valve with stainless steel
lines. Now the heart of the beast...the motor is built by Tom at "Team IMS
Racing" - See List of Engine Modifications Below. All shift linkage has been
removed and replaced with a single gear actuator. All plastics are Full
Bore's Race Rhino package in all black. Finally the aluminum work is
fabulous and is powder coated black to give it that stealth look. The list
can go on and on but we thought we'd list the major items. Serious inquires
only!!!

Side-Rear-Driveway.jpgTeam IMS Racing Engine (770cc Strocker Engine)

Engine-Driveway.jpgCustom + 4mm Stroker Crank (88mm)
105.5mm Custom JE Stroker Piston 12:01
48mm Mikuni Carb  - High Volume Mikuni Fuel Pump
Carrillo Rod and Welded Crank
CDI Box
Super Seal K&N Filter Kit
Custom 102mm - 10.5:1 Piston with Team IMS Racing unique oil rings & dome
design
Custom "HOT Cam" for Stroker
Heavy Duty Valve Springs
Cylinder Head Porting & Three Angle Valve Job
KMS High Performance Clutch Kit
+1mm Intake & Exhaust Valves
Team IMS Racing Exhaust System
Carrillo Rod and Welded Crank
New High Performance Clutch Kit
Two Bros (Dual Exhaust System)

Jump.jpgInside-Driveway.jpgAdditional Parts and Pieces:

. Bilstein Shocks with External Reservoirs
. So Cal Fab Suspension Arms Nickel Plated
. HCR Spindles (Brand New)
. Brembo Brake Calipers and Rotors
. Gear One Steering Box
. 8 Gallon Fuel Cell
. PRP Race Seats
. Full Bore Plastics (Body)
. KMS Clutch (CNC Machined Sheave)
. Front Sway Bar
. Quick Release Steering Wheel
. Brake Bias Controller
. Douglas Rockstars Wheels
. Beadlock Specialties
. Crow 5 Point Seat belts
. Safety Nets

Asking 32,500.00 Serious Buyers ONLY !!!  (562) 690-1484  Gary Fries gary@microtouchinc.com

 

---

To get pricing on any of the below items email Webmaster@gotdunes.com

---